Static Ip - D-Link DWR-116 User Manual

Section 3 - Configuration
Choose this Internet connection if your ISP assigns you a static IP
address.
IP Address: Enter the IP address assigned to your network
connection.
Subnet Mask: Enter the subnet mask.
Default Gateway: Enter the default gateway.
Primary DNS Enter the primary DNS server.
Server:
Secondary DNS Enter the secondary DNS server.
Server:
MTU: You may need to change the Maximum
Transmission Unit (MTU) for optimal performance.
The default value is 1500.
MAC Address: The default MAC Address is set to the Internet
port's physical interface MAC address on the
broadband router. It is not recommended that you
change the default MAC address unless required
by your ISP. You can use the Clone. button to
replace the Internet port's MAC address with the
MAC address of your Ethernet card.
Click Save.Settings to save your changes, or click
Don't.Save.Settings to discard your changes.
D-Link DWR-116 User Manual

Static IP

22