Regular Cleaning - ICB HM-12 User Manual

6. Do not tighten the lock nut excessively;
7. Press the stop button when you have finished using the appliance, then dis-assemble the appliance
and thoroughly clean the openings and all other components.
6.1 GENERALITIES

The appliance must be cleaned at least once a day or if necessary more than once.

Scrupulously clean all the various components of the HM-12/HM-22/HM-22B whether they
come in direct contact with the food product or not.

Never clean the HM-12/HM-22/HM-22B with a pressurized water-jet, industrial cleaners, and
brushes or any other type of cleaning utensil that could damage the surface of the appliance.

Before cleaning you must disconnect the electricity supply plug isolating the appliance
from the main power circuit.
6.2 PROCEDURE TO FOLLOW FOR CLEANING THE APPLIANCE (see fig 6)
- remove the pestle and food tray;
- unscrew the lock nut and remove the disk, blade screw feeder, unscrew in the direction indicated by
the arrow.
- unscrew the knob and remove the grinder, always in the direction indicated by the arrow.
Now all the components can be washed (see fig 7 ) using warm water ( 50 ℃) and a neutral detergent.
To clean the main structure use a damp cloth, rinsing frequently.
The grater roller mounted on the HM-12/HM-22/HM-22B should be brushed cleaned. Carefully clean
the punched holes. Make sure all the components are completely dry before remounting them.
N.B. to remount the HM-12/HM-22/HM-22B follows the above diagrams:
1) Mount the grinder block and block it in position using the knob; the pin on the knob must be inserted
into the opening;
2) Insert the screw feeders into the grinder block make sure it is positioned correctly;
3) Mount the blade onto the square pin on the screw feeder and then mount the disk maintaining the
original coupling configuration;
4) Once all the components have been mounted secure by screwing the lock nut in place.
FIG 6-Removing components
1-lock nut

6 REGULAR CLEANING

2-disk 3-blade 4-screw feeder 5-grinder block