Caller Id; Call Waiting; Voice Dialing - Xlink ITC-BTTN Owner's Manual

C aller Id
Caller ID will display the incoming call information on the LCD of your extension sets.
For this feature to work, both the cell phone and your extension telephones must
support caller ID.
NOTE:
• This feature may not be supported by all cell phones.
• Most cell phones only provide the caller number and not the name.
C all WaITING
The XLink will generate a call waiting tone to alert you to another incoming call on any
of the 3 lines. When you hear a call waiting tone, press the FLASH (or CALL WAITING or
LINK , etc.) button on the extension telephone. This will connect the second caller.
Pressing the FLASH key will then toggle through all active calls.
NOTE:
• This feature may not be supported by all cell phones.

voICe dIalING

If your cell phone supports voice dialing then the XLink may be able to access this
feature. The following steps may allow you to voice dial from extension telephones:
1. Pick up an extension telephone. Listen for dial tone.
2. OPTIONAL: Select Line: 1
14
FLASH or 2 FLASH or 3 FLASH