Table of Contents
Advertisement
UNPACKAGING
Refer to Figure 1.
• Check for shipping damage. Check immediately
whether all parts and accessories are included. The
grinder itself comes assembled as one unit. Additional
parts(listed below) which need to be fastened to sander,
should be located and accounted for before assembling.
• The following items are included with your Bench
Grinder:
Item
Description
A.
Shield Bracket left
B.
Shield Bracket right
C.
Safety Shield Assembly - left (magnified)
D.
Safety Shield Assembly – right
E.
Work Rest – left (grooved)
F.
Work Rest – right (flat)
G.
Work Rest Brackets
H.
Rear Shield Bracket Knobs
I.
Work Rest Knobs
J.
Safety Shield Knobs
K.
Washers (6 mm)
L.
Washers (5 mm)
M.
Lock Washers (6 mm)
Figure 1
A
C
ASSEMBLY
• Carefully remove the tool and any accessories from the
box.
• Make sure that all items listed in the packing list are
included.
• Inspect the tool carefully to make sure no breakage
or damage occurred during shipping. Do not discard the
packing material until you have carefully inspected and
satisfactorily operated the tool.
WARNING
Do not use the machine until it is completely assembled
and you have read and understood the entire operating
manual.
TOOLS NEEDED
Qty.
1
You will need the following tools to assemble and adjust
1
the machine. (The tools are not included.)
1
• Combination Wrench (3) 7mm, 10mm, 12mm
1
• Phillips Head Screwdriver
1
• Adjustable Wrench
1
2
2
2
2
4
2
2
B
D
E
G
H
J
K
L
3
F
G
J
M
Advertisement
Table of Contents
