NHBoard TGN Series Installation And User Manual page 13

Installation and User G uide of Board
4 With an assistant's help, hang the
interactive whiteboard on the floor
stand, and fasten 4 of the hexagon
screws with provided hex
screwdriver.
NHBoard Touch Sensitive Whiteboard Mounting Instruction
You can use floor stand FS-A601 with the NHBoard s except TGN50/TGU50. Due to the small size of
TGN50/TGU50 , we provide with two mounting ways for choosing, one is wall mounting like other models
of NHBoard TGN/TGU series, and the others is table mounting method by which you can mount the TGN50
along the side of table. The illustration below shows the mounting procedures for TGN50.
Wall mounting procedures
1. Fetch the TGN50 series
interactive whiteboard from the
package
2. Unscrew the four set of inner hex
head screws and its cushions of
quadrate tube bracket
3. Unscrew the four sets of bolts
and its nuts of the L-shaped
metal bracket
4. To mount the quadrate tube
bracket on the TGN50 interactive
Ideas of Interaction
13