Download Print this page
American Standard 2998 Specification Sheet
American Standard 2998 Specification Sheet

American Standard 2998 Specification Sheet

American standard cadet right height 10" rough-in elongated toilet specification sheet

Advertisement

Quick Links

CADET™ RIGHT HEIGHT™ 10" ROUGH-IN
ELONGATED TOILET
2998.010
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• 16-1/2" rim height for accessible applications
• 10" roughing-in
• Elongated siphon action jetted bowl
• AquaForce flushing technology
• Fully glazed 2" trapway
• Close-coupled tank with raised lip detail on
tank cover
• Color-matched trip lever
• Speed Connect
tank/bowl coupling system
®
• Sanitary bar on bowl
• 2 bolt caps
• 100% factory flush tested
3417.016 Bowl
4110.016 Tank
Alternate Tank Configurations Available:
4110.600 Tank complete with tank cover
locking device
4110.800 Tank complete with trip lever located
on right hand side
Nominal Dimensions:
705 x 495 x 813mm
(27-3/4" x 19-1/2" x 32")
Fixture only, seat and supply by others
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
To Be Specified:
❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Silver
❏ Fawn Beige ❏ Black
❏ Seat: American Standard #5324.019 "Rise and
Shine" solid plastic closed front, seat with cover.
❏ Seat: American Standard #5311.012 "Laurel"
molded closed front seat with cover.
❏ Alternate Seat:
❏ Supply with stop:
© 2008 AS America Inc.
CADET™ RIGHT HEIGHT™
10" ROUGH-IN ELONGATED TOILET
FINISHED WALL
19mm ± 6mm
(3/4 ± 1/4)
184mm
(7-1/4)
(18-1/2)
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
16mm
(5/8)
178mm
311mm
(7)
(12-1/4)
254mm
C/L OF OUTLET
(10)
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
254mm (10") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
*
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range
of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
K82
VITREOUS CHINA
705mm
(27-3/4)
470mm
SUPPLY
AS
REQ'D
419mm
(16-1/2)
*
254mm
(10)
152mm
(6)
FINISHED
FLOOR
495mm
(19-1/2)
813mm
(32)
375mm
(14-3/4)
235mm
(9-1/4)
Revised 2/08

Advertisement

loading

This manual is also suitable for:

Cadet specifier 3417.016Cadet right height 2998.010Cadet right height 4110.016Cadet right height 4110.600Cadet right height 4110.800