Memory Card Removal/Installation; Removal; Installation; Capacity, Data Rates And Part Numbers - Mackenzie M2 User Manual

7. Memory Card Removal/Installation:

The M2 utilizes removeable PCMCIA FLASH memory cards to store audio and configuration information.
The image below illustrates how the card interfaces with the M2. The memory of the M2 is hot swappable
and may be removed or installed without removing power from the system.
7.1.

Removal

1. Unscrew the four mounting screws and remove the cover plate to expose the memory card.
2. Depress eject button located directly to the right of the card to unseat the memory.
3. Remove memory card from the M2.
4. Replace cover and secure with the four mounting screws.
7.2.

Installation

1. Unscrew the four mounting screws and remove the cover plate to expose the memory card holder.
2. Align the side rails of the memory card so they glide into the black plastic guides of the memory
card holder.
3. Push the card into the holder until the eject button located directly to the right of the card, extends
beyond the front surface of the card.
5. Replace cover and secure with the four mounting screws.
7.3.

Capacity, Data Rates and Part Numbers:

M2 User's Manual V 1.0 Revised 4/21/2003
Size Model No.
8Meg MPC 8 FATA
16Meg MPC 16 FATA
32Meg MPC 32 FATA
48Meg MPC 48 FATA
64Meg MPC 64 FATA
85Meg MPC 85 FATA
110Meg MPC 110 FATA
Approx. recording time(Minutes)
Mono / Stereo or Dual Mono
Freq. 7kHz 15kHz
Kbps 32 64
32/16 16/8
66/33 33/16
133/66 66/33
200/100 100/50
266/133 133/66
354/177 177/88
458/229 229/114
20kHz
128
8/4
16/8
33/16
50/25
66/33
88/44
114/57
Page 22