M2.2 Enhanced Configuration And Features; Remote Control, 11 - 20; Rs-232 Commands - Mackenzie M2 User Manual

2.5.

M2.2 Enhanced Configuration and Features:

The M2.2 offers all the configuration and features of the base system with 10 additional start inputs.
Contacts 11 - 20 are located above 1 - 10.

2.5.1. Remote Control, 11 - 20:

12 position pluggable terminal strip. Use for remote control start of
message playback and stopping messages.
Stop
Start 11
Start 12
Start 13
Start 14
Start 15
Start 16
Start 17
Start 18
Start 19
Start 20
Com
The Stop and Common inputs are parallel to the corresponding inputs on the 1 - 10 connector.

3. RS-232 Commands:

At the M2> prompt various commands may be issued to control record, playback and other
functions of the M2. Each command and associated string must be followed by control, line feed or
<CR><LF>.
CMD Options
BLD
DIR
LST
PLY [<1-255>,<1/2/A>,<1-254>,<1-60>]
PRI [<1-255>,<1>Enable/<0>Disable/<S>Scan>]
RST
SHP
STP [<1 or 2 or A>]
STS [<0>Off/<1>On]
SYS
DDIR
DDEL [<"filename">]
DDLD [<msgnumber>]
DULD [<"filename">]
DGDT
DSDT [<"datetime">]
M2 User's Manual V 1.0 Revised 4/21/2003
Connect to common to stop message playback
Connect to common for message 11 playback
Connect to common for message 12 playback
Connect to common for message 13 playback
Connect to common for message 14 playback
Connect to common for message 15 playback
Connect to common for message 16 playback
Connect to common for message 17 playback
Connect to common for message 18 playback
Connect to common for message 19 playback
Connect to common for message 20 playback
Connecting any input to common activates the function
Command List
Description
Build message file index
Directory of Message Priority.
This Commands Listing.
Play Message, Channel, Repeat, Delay.
Set message priority
Warm Reset System
Init Configs & Erase Messages.
Stop message playback on selected channel
Display Play Status Messages.
Display System Information.
Displays a file directory listing
Deletes file from directory.
Initiates YMODEM session to download file to
the selected message location.
Initiates YMODEM session to upload the
selected file.
Get date and time from the M2
Set date and time of the M2. Format is
"mmddyyyyhhmmss" for month, day, year,
hours, min., sec.
Page 13