Preload Adjustment - Ohlins MX Owner's Manual

Pre-load adjustment
1
Put the bike on a stand and loosen the screws in
the top fork crown that hold the fork legs.
NOTE!
On most MX-bikes you have take of the handle
bar off before you can unscrew the top cap.
Remove the adjustment wheel and the springs
and balls of the adjuster.
Adjustment
wheel
Balls and
springs
2
Unscrew the top cap, use tool (1860-01 or
1761-02).
Put a box under the front wheel so that the
springs are visible.
Tool (1761-02)
Damper rod
extender
Tool (1860-01)
3
Remove the top cap from the damper rod extender.
Use a 17mm wrench, and tool (1860-01 or
1761-02).
Top cap
17 mm
wrench
Damper
rod assy
7