Dmx Mode; Dmx Channel Values - Chauvet SWARM User Manual

DMX Mode

This mode allows the unit to be controlled by any universal DMX controller. If you are unfamiliar with
DMX, please read the DMX Primer in the Appendix section of this manual.
1) Press the <MODE> button until
2) Press the <ENTER> button.
3) Use the <UP> and <DOWN> buttons to set the DMX starting address.
4) Press the <ENTER> button to save the setting.
Note: When the fixture is receiving DMX signal, the DMX indicator will begin flashing on the display.
See the drawing on page 6 for the location of the indicator.

DMX Channel Values

C
HANNEL
1
2
3
4
Swarm™ User Manual
V F
ALUE UNCTION
Function
000  009
Blackout
010  019
Red
020  029
Green
030  039
Blue
040  049
Green/Blue
050  059
Red/Blue
060  069
Red/Green
070  079
Red/Green/Blue
080  139
Single color chase
140  199
Multi color chase
200  224
Automatic fast
225  249
Automatic slow
250  255
Sound active
Run speed (when CH.1 is between 080  199)
000  255 Slow  Fast
Strobe
000  004
No function
005  254 Strobe: slow  fast
255  255
Strobe to sound
Rotation
000  004
No function
005  127 Clockwise rotation: slow  fast
128  133
Stop
134  255 Counterclockwise rotation: slow  fast
13
is displayed on the LED display.
4/23/2009 11:59 AM