Nokia 7210 User Manual page 52

M e n u f u n c t i o n s
To set the divert setting to on, select
Activate and then select the timeout
after which the call is diverted, if
this is available for the divert option.
To set the divert setting to off, select
Cancel, or select Check status
check whether call divert is
activated or not. Several divert
options may be active at the same
time.
To see the divert indicators in
standby mode, see
on page 2.
Anykey answer
Press Menu, and select Settings,
Call settings and then
answer. Select On
answer an incoming call by briefly
pressing any key, except
selection keys
.
Automatic redial
Press Menu, and select Settings,
Call settings and Automatic
Select On and your phone will make
a maximum of ten attempts to
connect the call after an
unsuccessful call attempt.
38
to
"Standby mode"
Anykey
and you can
,
and , and
redial.
Copyright © 2004 Nokia. All rights reserved.
Speed dialling
Press Menu, and select Settings,
Call settings and Speed
Select On and the names and phone
numbers assigned to the speed
dialling keys, from
be dialled by pressing and holding
the corresponding number key.
Call waiting
Press Menu, and select Settings,
Call settings and Call
Select Activate and the network will
notify you of an incoming call while
you have a call in progress (network
service). See "Call waiting"
11.
Summary after call
Press Menu, and select Settings,
Call settings and Summary after
call. Select On and the phone will
briefly display the duration and cost
(network service) of the last call.
Send my caller identity
Press Menu, and select Settings,
Call settings and Send my caller
identity. Select Yes
number will be displayed to the
person you are calling (network
service). Select Set by network
the setting agreed upon with your
service provider is used.
dialling.
to , can
waiting.
on page
and your phone
and