Carpet Cleaning; Machine Prep - Bissell 1210 Series User Manual

Operations

machine prep

1. Remove the tank from the base of the
machine by lifting the tank carry handle.
2. Carry like a bucket to the sink. Pull upward
on bottom edge of the latch in the back of
the tank to unhook and remove the lid.
3. Pull up on the bladder fill cover that says
"Fill Here". Fill the bladder with clean hot
tap water. *Do not boil or microwave water
as it can destroy the bladder.
4. The measuring cup provided holds 2.5oz
when filled to the fill line. Fill the measuring
cup with formula to the indicated fill line and
pour in to the tank bladder.
5. Replace the tank lid by seating the front
edge of the tank before the back, then lock
the latch in place.
notE: Remember to secure the lid and
test to make sure it is secure before picking
up the tank.
6. Place tank into machine base, seating
firmly in place.

carpet cleaning

1. Plug the deep cleaner into a proper outlet. set
ReadyTools dial to the Floor Cleaning setting.
Turn the power on by pressing the red power
switch on the back of the unit with your foot.
2. With your foot, press the gray handle release
lever located on the back of unit below water
tank to detent handle.
3. While pressing the spray trigger, make one
slow forward wet pass and another back. let the
bissell advanced deep cleaning formula, and
Dirtlifter Powerbrush do the work for you.
Caution: Do not overwet.
4. Release the spray trigger and make one
slow forward and backward pass over the
same area to remove any residual dirty water
and aid in drying.
5. Repeat cleaning passes until solution being
suctioned up appears clean. Continue passes
without pressing the trigger until you can't see
any more water being suctioned up.
1.
3.
6.
Power switch
WaRnInG
To reduce the risk of fire and electric shock due to internal
component damage, use only BISSELL cleaning fluids
intended for use with the deep cleaner. Non-BISSELL
cleaning solutions may harm the machine and void
the warranty.
Tip
www.bissell.com
2.
5.
Handle Release
» Thorough vacuuming before
deep cleaning will prevent
early clogging of the lint trap.
800.237.7691
7