Before Using The Acuna88 - Studiologic acuna88 Operation Manual

Before using the acuna88

Power connection Use the AC power adaptor supplied with the device to connect
the acuna88 to a power socket. Switch the unit on by using the
power button near to the power inlet of the acuna88.
MIDI In, MIDI Out 1 / 2
Connect the MIDI Out of another MIDI device with the MIDI In of
the acuna88. Incoming data arriving at the MIDI In are merged
with the MIDI signals of the acuna88. You can assign the MIDI In
to any MIDI Out (MIDI Out 1, MIDI Out 2 or USB, please refer to
page 14 MIDI In).
F
USB For MIDI data transmission via USB, connect the acuna88 to your
computer with a USB cable. The first time you switch the acuna88
on, it will be recognised by your computer automatically and the
appropriate driver will be installed by the OS (class compliant).
For attaching an Apple iPad to the acuna88 you need a Camera
Kit for your iPad. Directly connect the USB port of the Camera Kit /
iPad with the acuna88 using a USB cable.
Sustain / Expression Pedal
Connect the Studiologic foot switch PS 100 or the sustain pedal
VFP-1with the acuna88 at the socket labeled Jack1.
At the socket labeled Jack2, you can plug in a Studiologic volume
pedal VP 27.
The pedals are available as optional extras.
Note: Jack1 is used for sustain pedals and foot switches, while
Jack 2 is available for expression and volume pedals.
If you would like to attach other pedals, please refer to the
required specifications on page 52 Pedal Specifications.
F
Breath Controller Use the 3,5mm stereo jack to attach a Breath Controller to the
acuna88. The Breath Controller can control a different MIDI
parameter for each zone (please refer to page 11 Breath.Ct).
F
Music / iPad stand
The iPad stand or music stand supplied can be attached to the
holes above the display of the unit.
8 acuna88 by Studiologic®