Reset Factory Presets; Version; Store Presets - Studiologic acuna88 Operation Manual

Piano acuna88

Hide thumbs Also See for acuna88:

Manual (24 pages)

Available languages

If you would like to restore the factory presets, turn Data Entry

on the Reset Factory Presets page. Now the display shows Y.

Press Data Entry. You will be asked Are you sure?? Turn

Data Entry again to select Y in the display. Finally confirm the

factory preset restore by pressing Data Entry.

WARNING: This function will irrevocably delete and overwrite all

prior stored settings of the preset numbers P01 to P50 with the

original factory settings!

The last page of the Misc.Menu shows the current firmware

version of your acuna88. You can update the firmware via USB if

required.

To store your settings and adjustments permanently in a preset,

press Data Entry until the display shows Save&Exit.

Now you have three options:

1. If you want to go back one level to the programming pages to

make some more adjustments, press Data Entry again.

2. If you want to save your settings in a preset, confirm by

pressing the + button. The display switches to the preset name

page. Name your preset here. By turning Data Entry you can

change each character. With the + button and - button you may

move between the characters.

After naming the preset press Data Entry again. Preset Num

will be displayed. Turn Data Entry to select one of the 50 preset

locations P01 to P50. Press Data Entry again one last time to

store your preset permanently with its name at the selected

preset location.

3. To exit the programming and setting mode without saving

your adjustments, press the - button. You will be returned to the

last selected preset.

Store presets