Troubleshooting Chart - Standard Horizon HX280S Owner's Manual

8.3 TROUBLESHOOTING CHART

SYMPTOM
The [ SCAN ( DW )] key
does not start the scan.
Cannot select between
USA, INTL, or Canadian
bands.
Speaker audio is not
heard when the [ SQL ]
key is press and held.
Some keys do not
operate.
Cannot select keylock
function.
Charging indicator on
CD-46 does not
illumininate.
HX280S
PROBABLE CAUSE
No channels memorized.
Squelch is not adjusted.
Proper operation not
followed.
Low battery.
Audio volume level is too low.
Key Lock is on.
Proper operation not
followed.
Defective battery FNB-V105LI.
REMEDY
Use the [ MEM ] key to enter desired
channels into the transceiver's
memory.
Adjust the squelch to threshold or
to the point where noise just dis-
appears. Further adjustment of the
squelch control may eliminate in-
coming signals.
HOLD down the [ 16/9 ] key and
press the [ WX ] key.
Charge battery. Refer to section
4.2.3 of this manual.
Turn the VOL knob clockwise.
Turn Key Lock off. Refer to section
5.1 of this manual ([ H/L (
Hold down the [ H/L (
seconds.
Contact your Standard Horizon
dealer.
)] key ) .
)] key for 2
Page 31