Preset Channels ( 0 ~ 9 ) : Instant Access; Programmimg; Operation - Standard Horizon HX280S Owner's Manual

6.9 PRESET CHANNELS ( 0 ~ 9 ) : INSTANT ACCESS

Ten user assigned channels can be programmed for instant access. Pressing
the [ PRESET ] key activates the user assigned channel bank.
6.9.1 PROGRAMMING
1. Select the desired channel to be assigned into the Preset Channel Bank
using the [ ] or [ ] key.
2. Press and hold the [ PRESET ] key until the Preset Chan-
nel Number "0 0 0 0 0 " is shown at the right of the channel num-
ber on the display.
3. Repeat steps 1 and 2 to program the desired channels into Preset Chan-
nels "1 1 1 1 1 " ~ "9 9 9 9 9 ".
4. To delete a Preset Channel, select the Preset Channel Number to be de-
leted using the [ ] or [ ] key, then press and hold the [ PRESET ] key until
the Preset Channel Number is removed from the display.

6.9.2 OPERATION

Pressing the [ PRESET ] key will toggle between Preset Channels "0 0 0 0 0 " through
"9 9 9 9 9 " and the last selected "regular" channel. Preset Channel
"0 0 0 0 0 " is represented by "0 0 0 0 0 " to the right of the channel number
on the display for one second, and preset channel "1 1 1 1 1 " is
represented by "1 1 1 1 1 " and so forth. The preset channel number
will disappear after one second.
Page 22 HX280S