AEG Voxtel R300 User Manual page 11

Press the menu button
screen. Press the up
code 1-83.
Press the PTT button to confirm your setting.
4.9 Call alert
Your PMR can alert you to incoming signal by emitting an audible call
tone.
4.9.1 Call-ring tone
You can send a call-ring tone to other PMR users to give an alert that
you want to communicate with them.
Press the call button
You will hear a ring tone for about two seconds;
the LCD screen. Any other units within the transmitting range and
tuned to the same channel and sub-channel (if applicable) will hear
the call-ring tone.
4.9.2 Selecting a call- ring tone
The unit is equipped with15 different types of call-ring tones.
Press the menu button
blinking on the LCD screen.
Press the up
tone.
>The respective call- ring tone sound will be played when changing
from one tone to another.
Press the PTT button to confirm your setting.
4.10 Setting the Roger beep
The Roger beep is a tone which is automatically transmitted whenever
the PTT button is released. This alerts the receiving party to inform
that you have intentionally ended the transmission and you are now
in receive mode.
Press the menu button
while the "ON" icon is blinking on the LCD screen.
Press the up
Press the PTT button to confirm your setting.
seven times, DCS flashes on the LCD
or down
.
8 times, the "C 1" icon will display and is
or down button to select the desired call-ring
9 times, the "R0" icon will be displayed
or down button to select the roger beep on/off.
button to begin scanning DCS
TX
icon appears on
11