Table of Contents
Advertisement
4. Handling Instructions
-
How to use
5. 3D Monitor Setting
Guide
S465D
Multi Function 2D/3D Wide Monitor
•
When you are viewing stereoscopic images, please use the 3D eyewear of the product.
Without these glasses, you cannot enjoy stereoscopic images. If you use some polarized
glasses from other companies, you cannot fully enjoy the stereoscopic images.
•
Do not use the polarized glasses for other uses other than 3D viewing.
•
Do not touch the surface of the monitor screen with bare hands.
•
When the surface of the monitor screen gets dirty, wipe it clean softly with a smooth cloth
(cotton flannel). Using detergent, solvent, etc. can cause it to get damaged.
•
If the stereoscopic images do not display correctly, read the product manual and 3D software
manual carefully, and follow instructions as described.
•
If they still display improperly, do not disassemble it and contact the Customer Support.
•
For how to operate LCD monitor, read "User's Guide."
Please do NOT disassemble the product.
!
1.
In case playing 3D using TriDef Software in your PC
•
Optimal resolution for 3D viewing is 1920x1080/60Hz.
If you run 3D on different resolutions, its 3D effects can decrease.
•
Use signal input source at RGB under PC or HDMI mode. HDMI mode is recommended.
•
Install the TriDef Software in your PC.
2. In case playing 3D by the 3D function in the monitor.
•
Optimal resolution for 3D viewing is 1920x1080i/P, 50/60Hz.
•
Use signal input source at Component or HDMI.
•
Press the "3D" button on the remote.
•
Once 3D screen is shown, display mode is automatically changed to "Auto Wide".
Viewing on a different mode may decrease 3D effects.
•
On Auto wide mode, according to input video signal, some noise may be displayed on the
side of screen. This noise, however, is originally caused by input video signal.
/5
Hide quick links:
Advertisement
Table of Contents
