Download Print this page

Sealife SL96082 Instruction Manual page 5

External flash 200 feet ( 60 meters)

Advertisement

IV. Accessories and Related Products
Accessories and spare parts are available at your local authorized
Sealife dealer. Visit our website at www.sealife-cameras.com for a
complete list of dealers in your area.
Spare Parts:
Item #SL96010: Digital Flash (head only)
Item #SL9605: O-Ring Replacement Kit
(authorized service only)
Contains 1 O-Ring and 1 gasket
Item #SL9601: Flash arm and base assembly
(no head)
New! SeaLife ® Flash Link
Item #SL962:
Optical Cable connection for all SeaLife flashes.
Ensure firing of SeaLife flashes in all light
conditions and flash aiming positions allowing
you more freedom to control your lighting.
20
II. Instructions For Use
How easy it is...
your new SeaLife Flash
Attaching camera to flash
Bottom Bracket
mounting bracket
1
1
Prepare camera before attaching camera to
flash. For film cameras, insert two new AA
batteries and a roll of 35mm film. Any
speed film, slide or print, will work from 50
ISO to 800 ISO, although 200 ISO film
speed is recommended. Turn camera
power on and seal housing. Refer to
camera instruction manual "Great Pictures
Made Easy" for complete details.
For SeaLife digital cameras, set camera to
"External Flash" mode. Make sure to use
freshly charged Ni-MH batteries and insert
a blank memory card into the camera.
Refer to digital camera instruction manual
for more details.
2
Attach camera to flash mounting bracket.
2
(finger tight only).
5

Advertisement

loading

This manual is also suitable for:

Sl960