Behringer Xenyx QX2442USB User Manual page 23

23
XENYX QX2442USB/QX2222USB/QX1832USB/QX1622USB User Manual
2-Track Out
Type
Impedance
Max. output level
DSP
Type
Converter
Sampling rate
Wireless Input
USB dongle
Main Mix System Data (Noise)
Main mix @ -∞,
channel fader @ -∞
Main mix @ 0 dB,
channel fader @ -∞
Main mix @ 0 dB,
channel fader @ 0 dB
Power Supply
Mains voltage
Power consumption
Fuse (100 - 240 V~, 50/60 Hz)
Mains connector
USB
Connector
Audio
Converter
Sample rate
Physical/Weight
Dimensions (W x D x H)
Weight
RCA connector
1 kΩ
+22 dBu
KLARK TEKNIK
24-bit Sigma-Delta
64/128-times oversampling
40 kHz
Accepts signals from 2 independent
Behringer ULM mics
-100 dB / -103 dB A-weighted
-88 dB / -91 dB A-weighted
-80 dB / -82 dB A-weighted
100 – 240 V~, 50/60 Hz
50 W
T 1.6 A H 250 V
Standard IEC receptacle
Type B
Stereo in/out
16-bit
48 kHz
430 x 370 x 90 mm (16.9 x 14.6 x 3.5")
4.7 kg (10.4 lbs)
QX1622USB
Microphone Inputs
XENYX Mic preamps
Type
Mic E.I.N. (20 Hz - 20 kHz)
@ 0 Ω source resistance
@ 50 Ω source resistance
@ 150 Ω source resistance
Frequency response
Gain range
Max. input level
Impedance
Signal-to-noise ratio
Distortion (THD+N)
Phantom power
Line Input
Type
Impedance
Gain range
Max. input level
Frequency Response (Mic In → Main Out)
<10 Hz - 160 kHz
Stereo Inputs
Type
Impedance
Gain range
Max. input level
2-Track In
Type
Impedance
Max. input level
Equalizer 3-Band Semi-Parametric
Low
Mid
High
4
XLR connector, balanced,
discrete input circuit
-134 dB / -136 dB A-weighted
-131 dB / -133 dB A-weighted
-129 dB / -131 dB A-weighted
<10 Hz - 150 kHz (-1 dB)
<10 Hz - 200 kHz (-3 dB)
+10 dB to +60 dB
+12 dBu @ +10 dB gain
2 kΩ balanced
107 dB / 110 dB A-weighted
(0 dBu In @ +22 dB gain)
0.005% / 0.004% A-weighted
Switchable, +48 V
¼" TRS connector, balanced
20 kΩ balanced, 10 kΩ unbalanced
-10 dB to +40 dB
30 dBu
±3 dB
4 x ¼" TRS connector, balanced
20 kΩ balanced, 10 kΩ unbalanced
-20 dB to +20 dB
+22 dBu
RCA connector
10 kΩ
+22 dBu
80 Hz / ±15 dB
Variable 100 Hz - 8 kHz / ±15 dB
12 kHz / ±15 dB