Set Supervisor / User Password - Gigabyte 6VX7-4X User Manual

6VX7-4X

Set Supervisor / User Password

When you select this function, the following message will appear at the center of the screen to assist you in
creating a password.
AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.20
( C ) 1998 American Megatrends, Inc. All Rights Reserved
STANDARD CMOS SETUP
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
POWER MANAGEMENT SETUP
PNP/PCI CONFIGURATION
LOAD BIOS DEFAULTS
LOAD SETUP DEFAULTS
ESC : Quit : Select Item (Shift) F2 : Change Color F5 : Old Values
F6 : Load BIOS Defaults
Type the password, up to eight characters, and press <Enter>. The password typed now will clear the previously
entered password from CMOS memory. You will be asked to confirm the password. Type the password again
and press <Enter>. You may also press <Esc> to abort the selection and not enter a password.
To disable password, just press <Enter> when you are prompted to enter password. A message "PASSWORD
DISABLED" will appear to confirm the password being disabled. Once the password is disabled, the system will
boot and you can enter Setup freely.
If you select always at "Password Check" Option in BIOS Features Setup Menu, you will be prompted for the
password every time the system is rebooted or any time you try to enter Setup Menu. If you select Setup at
"Password Check" Option in BIOS Features Setup Menu, you will be prompted only when you try to enter Setup.
INTEGRATED PERIPHERALS
HARDWARE MONITOR SETUP
SUPERVISOR PASSWORD
USER PASSWORD
IDE HDD AUTO DETECTION
SAVE & EXIT SETUP
Enter new supervisor password:
EXIT WITHOUT SAVING
F7: Load Setup Defaults F10: Save & Exit
Chang /Set /Disabled Password
Figure 11: Password Setting
43