Security Settings - Hawking Hi-Gain HAWNR3 User Manual

3-6-3 Security Settings

It is important to set your wireless security settings properly! If you do not
configure a wireless security setting, unauthorized users can use your
network and/or obtain valuable data without your consent.
To set wireless security settings, please click 'General Setup' tab at the top
of web management interface, then click 'Wireless Configuration' on the left
hand column. Choose 'Security Settings'.
Please select an encryption method from the 'Encryption' dropdown menu,
there are four options:
Disable
WEP
WPA
WPA Radius
3-6-3-1 Disable wireless security
When you select this mode, data encryption is disabled, and every wireless
device in proximity will be able to connect your wireless router if no other
security measure is enabled (like MAC address access control - see section
3-6-4, or disable SSID broadcast).
Use this option only when you want to allow any user to use your wireless
router, and you are not concerned about unauthorized access to your files
and/or transfers over your network.
3-6-3-2 WEP - Wired Equivalent Privacy
When you select this mode, the wireless router will use WEP encryption,
-Please go to section 3-6-3-1
-Please go to section 3-6-3-2
-Please go to section 3-6-3-3
-Please go to section 3-6-3-4
85