Flexco EBC1 Operating Manual
Corded and cordless models electric belt cutter
Hide thumbs
Also See for EBC1:
- Safety and operating manual (12 pages) ,
- Safety and operating manual (12 pages)
Table of Contents
Advertisement
Quick Links
Electric Belt Cutter
Safety and Operating Manual
for Corded and Cordless Models
For cutting rubber and elastomeric materials only.
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!
Th is manual contains important information about product function and safety. Please read and
understand this manual BEFORE operating the power tool. Please keep this manual available for
other users and owners before they use the power tool. Th is manual should be stored in a safe place.
www.fl exco.com
www.fl exco.com • Tel: 1-800-541-8028
Advertisement
Table of Contents
Related Manuals for Flexco EBC1
Summary of Contents for Flexco EBC1
- Page 1 Electric Belt Cutter Safety and Operating Manual for Corded and Cordless Models For cutting rubber and elastomeric materials only. WARNING IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury! Th is manual contains important information about product function and safety. Please read and understand this manual BEFORE operating the power tool.
-
Page 2: Table Of Contents
Electric Belt Cutter Table of Contents Main Components ...................pg. 3 Tool Specifi cations ...................pg. 3 General Safety Rules ................pgs. 4-7 Tool Preparation ..................pg. 8 Operation of Electric Hammer Drill ............pg. 8 Electric Cutter Operation ...............pg. 9 Tool Maintenance–Bearings ..............pg. 9 Tool Maintenance–Blade Replacement ..........pg. -
Page 3: Main Components
Drill – Make and Model Hitachi, DV16 V Makita BHP 454 Metabo, SBE750 Bosch 38636 Power Source / Charger Source EBC1, CEBC1, EBC2, and CEBC2 use 120V. EBC1-220, CEBC1-220, EBC2-220, AND CEBC2-220 USE 230V Drill – Current 6.0A 2.2A 6.2A 2.3A Cutting Capacity Cutting Capacity –... -
Page 4: General Safety Rules
Electric Belt Cutter General Safety Rules – Save Th ese Instructions– 1. WORK AREA Signal words: “DANGER” indicates an imminently hazardous CAUTION situation which, if not avoided, will result in death or serious injury. Th e signal word is Keep your work area clean and well lit. Cluttered limited to the most extreme situations. - Page 5 Electric Belt Cutter General Safety Rules 3. PERSONAL SAFETY 2. ELECTRICAL SAFETY DANGER WARNING Stay alert, watch what you are doing and Double Insulated tools are equipped with a use common sense when operating a power polarized plug (one blade is wider than the tool.
- Page 6 Electric Belt Cutter General Safety Rules 5. SERVICE AND MAINTENANCE 4. TOOL USE AND CARE WARNING WARNING Tool service must be performed only by Always use belt cutter on a level, fi rm surface. qualifi ed repair personnel. Service or Cutting is only allowed when operating the maintenance performed by unqualifi ed machine with one hand on the handle and the...
-
Page 7: General Safety Rules
Electric Belt Cutter General Safety Rules 6. CIRCULAR CUTTER SAFETY 7. REPLACING THE CIRCULAR BLADE WARNING CAUTION Make sure that any power cable is not located Do not attempt to resharpen blades. Th is will between circular blade and lower carriage. aff ect cutting completely through belt. -
Page 8: Tool Preparation
Fig. 2. operation of the cutter. Th e EBC1 and CEBC1 weigh 30 lbs. (13.6 kg) and the EBC2 and CEBC2 weigh 40 lbs. (18.1 kg). -
Page 9: Electric Cutter Operation
Belt Cutting Make sure belt is clean. Spray area to be cut Position Electric Belt Cutter on edge of with silicone lubricant (Flexco # 30392, not belt at square line. Align Cutting Guide included). Lift Blade Guard and insert belt on the Blade Guard with square line on between Carriage and Blade Guard. -
Page 10: Tool Maintenance-Blade Replacement
Electric Belt Cutter Tool Maintenance–Blade Replacement (corded model shown) If the Belt Cutter is diffi cult to operate, the blade may be worn and need replacement. Unplug drill from power source. Always wear cut-proof safety gloves and safety glasses when replacing blade. 1. -
Page 11: Logbook
Electric Belt Cutter Logbook DATE NOTES DATE NOTES —11—... -
Page 12: Spare Parts
30008 Th ank you for choosing the Flexco Electric Belt Cutter. Your feedback is appreciated and may be directed to Flexco Customer Service at 1-800-541-8028 2525 Wisconsin Avenue • Downers Grove, IL 60515-4200 U.S.A. Telephone: (630)-971-0150 • Fax: (630)-971-1180 • E-mail: info@fl exco.com • Web: www.fl exco.com Australia: 61-2-9680-3322 •...