Hitachi 42PD6000TA User Manual page 33

OPERATING INSTRUCTIONS (continued)
System Menu (continued)
PC Mode
Selected characters
Signal Format (off the function)
Advanced Press ENTER button to select the following functions
2.2
Gamma
Panel Lock
Off
Mode
Move Screen
Time
PIP Set Press ENTER button to select the following functions
TV
Source
Small
Size
9 positions for selection:
Upper Left, Upper Center, Upper Right,
Position
Middle Left, Middle Center, Middle Right,
Lower Left, Lower Center, Lower Right
Audio Source
Black is subdued for
Brightness increased overall
darkness.
Narrows the gap
PIP Display
Contrast between brightness
and darkness.
Decrease color
Color
intensity.
Swap
Power Save
System Reset (off the function)
HITACHI MODEL 42PD6000TA
- Press the ENTER button to show the information of the current input signal.
2.6 2.8
Adjust to preference.
On Off This is for locking out the control panel function.
Adjust to prevent children from touching.
Adjust to preference.
Mode 1 Mode 2 The moves the picture around the screen to reduce the panel image retention.
This is where stationary objects, such as screen logos, leave a slight image
visible after they should have disappeared.
Adjust to preference.
This moves the picture around the screen in small amounts, at set intervals, to
5 ~ 255 sec
reduce the panel image retention. This is where stationary objects, such as
screen logos, leave a slight image visible after they should have disappeared.
AV SV
Adjust to preference.
Medium Large
Adjust to preference.
Adjust to preference.
Main PIP
Adjust to preference.
Black is set off for
increased overall Adjust to preference.
brightness.
Broadens the gap
Adjust for maximum visibility to suit the ambient brightness.
between brightness
For normal viewing we recommend that the Contrast is set to [46].
and darkness.
Increase color
Adjust to preference.
intensity.
Main PIP
Adjust to preference.
On Off This is used to reduce power consumption when there is no signal. Setting it
On will lead the PDP TV to the standby mode when the PC input no signal.
The original factory settings for the items of this Menu page can be restored by
-
pressing the ENTER button.
Setup hint
33