Robertshaw 9400 User Manual page 8

7. Put the
position. The blower fan should turn on.
The display will show a
8. Put the
position. The blower fan should turn off.
Step 4: Customizing the Thermostat
Settings
System
Cool: The thermostat controls the cooling.
Off: The heating and cooling systems are off.
Heat: The thermostat controls the heat.
Fan
Auto: Equipment controls the fan.
On: The fan operates continuously.
Temperature
Heating: The default temperature for heating is 70°F (21°C). To
change the default setpoint, put the system switch in HEAT and
press the
down. The display will show SET. The display will return to the
current room temperature three seconds after the last input and
the new setpoint will be saved.
Cooling: The default temperature for cooling is 78°F (25°C). To
change the default setpoint, put the system switch in COOL and
press the
down. The display will show SET. The display will return to the
current room temperature three seconds after the last input and
the new setpoint will be saved.
-ON-AUTO switch into the ON
-ON-AUTO switch into the AUTO
or button to adjust the temperature setting up or
or button to adjust the temperature setting up or
°F
ROOM
OFF
Figure 7
and ON.
8