Caster Installation; Operating Instructions - Danby Premiere DDR30A1GP Owner's Use And Care Manual

Caster installation is recommended to avoid damage to floors.
!.Remove the casters from the bucket of the dehumidifier.
2. Position the dehumidifier on its side.
3. Locate the arrow on the bottom of the dehumidifier and insert
the caster according to the arrow direction.
4. Slide the caster in as far as it will go. The caster will snap
into place.
5. Repeat steps 1 to 4 for the other 3 casters.
8--+-- -
-
1) POWER Button:On
2) FAN SPEED Button: High I Low
3) TIMER Button: When unit is operating, press
TIMER to set number of hours desrred until unit will
shut off.When unit is in stand-by, press TIMER to set
number of hours desired until unit will
Setting timer from 1-24 hours. To cancel the timer,
proceed as above but set the ''timer off'' to zero (0)
hours.
4) °CfOF Button:Press the
between Celsius and Fahrenheit.
5) SET HUMIDITY/CURRENT HUMIDITY
DISPLAY:When machine is running, it displays the

CASTER INSTALLATION

OPERATING INSTRUCTIONS

7
6
0 -1'
1 2 3
I
Off
on.
tum
0 C/°F button to toggle
5
00
current humidity. Press UP or DOWN buttons to
select humidity setting. The humidio/ is adjusted in
increments of 5% by each press. Adjustable range is
within 30% RH to 90% RH. 10 seconds after
setting humidity, the display will change back to the
current humidity.
CURRENT TEMP/ TIMER SET DISPLAY:
6)
When machine is running, it displays the current
temperature. Press the TIMER outton to set the
machine to shut off automatically
amount of time. 10 seconds
the display will change back to current tempetauture.
7) DEFROST LIGHT:When temperature is low,
unit enters defrost mode and defrost light illuminates.
8) BUCKET FULL LIGHT: When water tank is
full, bucket full light illuminates.
4
SJ?ecified
after
displaymg the timer,
after