Troubleshooting And Maintenance - Uniden BTSC1500 Owner's Manual

Troubleshooting and Maintenance

If you have problems with the BTSC1500, see the suggestions in the table below. If these
don't help, contact customer support (see the back cover for contact information).
If...
The BTSC1500 won't
turn on.
The BTSC1500 won't pair
with my phone.
The BTSC1500 paired
with my phone, but
I can't hear anything
through it.
I can hear the caller, but
the audio is very weak
or soft.
10
Try...
Charging the battery completely.
-
- Making sure your phone is in pairing mode. Check your phone's manual for instructions on
Bluetooth device pairing.
Turning the BTSC1500 off. Wait at least 10 seconds, then turn the BTSC1500 on and try
-
again.
- Resetting the BTSC1500 (see page 11).
- Making sure your phone supports the Bluetooth headset profile or hands free profile.
Making sure the call connected and is still active.
-
- Making sure the phone transferred the call to the BTSC1500. Press and hold
function for 2 seconds to transfer the call.
- Turning the speaker volume up.
- Moving closer to your phone (if you aren't carrying it).
Keeping the battery fully charged. (As the battery power starts to run out, the speaker will
-
get softer.)
Multi-