Related Manuals for Uniden BTSC1100
Summary of Contents for Uniden BTSC1100
- Page 1 BTSC1100 Bluetooth Car Kit ® For more exciting new products please visit our website: Australia: www.uniden.com.au New Zealand: www.uniden.co.nz...
-
Page 2: What's In The Box
What’s in the box? Optional BTSC1100 Owners AC Adapter 12VDC - 24VDC Manual (AAD1500) DC (car) power adapter (CL1500) - Page 3 Getting to Know the BTSC1100 Charging port Speaker Sliding switch Charging status icon Volume down button Mute/Special Function button Multi-Function button Bluetooth status icon Sun visor metal clip Volume up button...
- Page 4 LED (Status Icon) and Tone Indicators Status Icon Indication Power On Bluetooth Status Icon blinks 3 times Pairing Mode Bluetooth Status Icon blinks repeatedly Connectable Mode Bluetooth Status Icon blinks 1 time every 5 seconds Connected Mode Bluetooth Status Icon blinks 2 times every 5 seconds While Calling Bluetooth Status Icon blinks 3 times every 5 seconds Status...
-
Page 5: Charge The Battery
10 hours of talk time and about 400 hours of standby time. Connect an adapter to the power connector on the side of the BTSC1100 and plug it into any standard; i) 12VDC-24VDC (DC adaptor), or ii) 240VAC (AC adaptor) power outlet. -
Page 6: Power On/Off
Pair your Phone to the BTSC1100 Power On/Off Slide the cover up to turn power on, slide the cover down to turn power off. Pairing Before using the car kit, it must be paired with a mobile phone first. Slide the cover up to turn power on. -
Page 7: Make And Receive Calls
Automatic Connection This unit supports Auto-Connection which makes it possible to be automatically connected to the last connected device after turn on. To manually reconnect, press the Multi-function button momentarily. Easy Pairing: This unit goes into the Pairing Mode automatically when it is turned on for the first time. -
Page 8: Answering A Call
have already programmed into your phone. If you want to cancel Voice Dialing, press the Multi-Function button during the Voice Dial Mode. [Note] Please make sure that your phone supports the Voice Recognition first (See your phone’s owner’s manual for detailed instructions) Answering a Call Press the Multi-Function button while the call is ringing. -
Page 9: Adjusting The Volume
Adjusting the Volume You can adjust the Volume by pressing the Volume Up(+) or Down(-) button. MIC Mute Press the Mute/Special Function button momentarily, during a call, to activate or deactivate the MIC Mute. A beep sounds every 10 seconds when MIC Mute is on. Call Waiting To use this feature, you must subscribe to Call Waiting through your service provider, and your phone must support the hands-free profile. -
Page 10: Pairing A Second Bluetooth Device
The unit supports simultaneous connection with 2 mobile phones with full control of each unit. Just pair the BTSC1100 to the first phone following the instructions on page 6. When the first phone is successfully paired, pair the BTSC1100 to the second phone. -
Page 11: Safety And General Information
But it will be automatically re-connected when you terminate the call. Resetting your BTSC1100 If you are having some trouble with this unit or you want to delete all your information (paired device information, etc.), you can reset it. Press and hold Volume Up(+) and Volume Down(-) for about 5 seconds. - Page 12 Keep the unit away from humidity, water and any other liquid. If the unit is exposed by water, moisture or other liquid directly, then do not operate it to avoid electrical shock, explosion and damage to the unit. Do not place or keep the unit near heat sources such as direct sunlight, radiators, stoves or other apparatus which produce heat.
- Page 13 Specifications Model Name BTSC1100 Bluetooth Core Spec Bluetooth Specifi cation V2.1+EDR Profile Headset, Hands-free Carrier Frequency 2402 MHz to 2480 MHz Audio Output 1 W(8Ω) Modulation Method GFSK, 1Mbps, 0.5BT Gaussian Asynchronous: 2178.1kbps / 177.1kbps Maximum Data Rate Synchronous: 1306.9kbps / 1306.9kbps...
- Page 14 Specifications Receiver Sensitivity -80 dBm / 0.1% BER Continuous Talk Time 10 Hours Stand-by Time 400 Hours Weight Dimension 51.2 mm (W) X 112.9 mm (H) X 15.7 mm (D) Charging Voltage DC 5.0V Charging Time MAX 3 Hours Operating Temperature -20°...
-
Page 15: Warranty
Elements of Warranty: Uniden warrants to the original ACT (New Zealand). retail owner for the duration of this warranty its BTSC1100 (hereinafter referred to as the Product), to be free from defects Procedure for obtaining performance or warranty: in the... - Page 16 © 2010 Uniden Australia Pty Ltd/Uniden New Zealand Limited Printed in PRC...