Honda 2005 Odyssey Installation Instructions Manual page 4

10. Match the length of the BUS cable to the length
of the vehicle 20-pin connector, then route the
two connectors to the glove box opening.
BUS CABLE
VEHICLE
14-PIN
20-PIN
CONNECTOR
CONNECTOR
BUS CABLE 14-PIN
CONNECTOR
(Align the BUS cable 14-pin
connector with vehicle
20-PIN CONNECTOR.)
11. Secure the BUS cable to the vehicle harness with
two wire ties.
12. Secure the BUS cable to the vehicle harness with
two wire ties.
BUS CABLE
4 of 6
WIRE TIE
VEHICLE
HARNESS
4219050B
GLOVE BOX
OPENING
VEHICLE
HARNESS
WIRE TIE
GLOVE BOX
OPENING
4220010B
13. Route the BUS cable from the glove box to the
center panel opening. Secure the BUS cable to
vehicle harness with two wire ties.
POCKET
OPENING
BUS CABLE
14-PIN
50 mm
CONNECTOR
Installing the Player
14. Get the player and the trim. Install the trim on the
player.
15. Install the two clips into the trim.
TRIM
PLAYER
BUS
CABLE
VEHICLE
HARNESS
WIRE TIE
4220021B
CLIP
4219061B
© Honda Access Corp. 2004