Changing Display Units; Rates Of Change - AWS WeatherBug User Manual

Digital Display Manual

3.2 Changing Display Units

The Digital Display unit provides the capability to display values in English or
Metric units. Table 2 depicts the measurement units available from the display
unit.
Weather Value
Temperature
Barometric Pressure
Wind Speed
Precipitation
Table 2: Available English and Metric Units
There are two circles just to the right of the "Units" button, one of which will be
illuminated, indicating which units are currently being displayed. English units
are the default setting of the Digital Display unit. To toggle between English units
and Metric units press the "Units" button. The indicator light will change as you
press the button.
The Standard English wind speed unit of miles per hour (mph) is factory set at
the time of order. To change the English wind speed units from miles per hour
(mph) to knots or vice versa, you must send the display unit back to WeatherBug
Technical Support via an RMA. Please call WeatherBug Weather Station
Technical Support at 800-624-4205 for assistance.

3.3 Rates of Change

The Weather Station Digital Display unit allows you to view the rates of change of
several weather values, as shown in Table 1. To view the rates of change press
and hold the "Rate" button in the lower left region of the display. Values for rates
which are not available will not be displayed. Releasing the "Rate" button returns
the display to the current conditions mode.
All rate values are expressed in "per hour" format. For example, when the rate
button is pressed and held, the value in the humidity readout box is the rate of
English Unit
Degrees Fahrenheit (F)
Inches of Mercury ("Hg)
Miles per Hour (mph)
Knots (knts)
Inches (in)
14
Metric Unit
Degrees Celsius (C)
Millibars (mbar)
Kilometers per Hour (km/h)
Centimeters (cm)