Table of Contents
Advertisement
To enable the Syslog Alert feature, click the [Enable Syslog Alerting] checkbox.
To configure the Syslog Server, enter the LAN IP of the [Syslog Server Address].
Immediate Alerts can be generated for both the email and Syslog alerts. To configure the type
of Alert that you want to get:
- An Intrusion is detected – this is a hacker attack attempt from the WAN
- Attempts to access a blocked site – alert to any attempts to access a site or keyword listed in
your URL/Blocking list.
DMZ Host (Demilitarized Zone)
If you have a client PC that cannot run an Internet application properly from behind the
firewall, then you can open the client up to unrestricted two-way Internet access. Enter the IP
address of a DMZ host to this screen. Adding a client to the DMZ (Demilitarized Zone) may
expose your local network to a variety of security risks, so only use this option as a last resort.
To access the DMZ configuration page, on the Side Navigation bar, click on [Firewall] link and
then click on the [DMZ] link.
To enable this option, click the [Enable DMZ Host] checkbox.
To configure a DMZ host, Enter in the LAN IP Address of the PC on your network in the input
fields.
TOOLS
The Tools menu allows a user to Restore to Factory Defaults and Reboot the Gateway.
Configuration Tools
Page 31 of 39
Advertisement
Table of Contents
