RAM 2014 PROMASTER Owner's Manual page 152

150 UNDERSTANDING YOUR INSTRUMENT PANEL
Accessing Preset Stations
When the preset buttons (1 through 6) are pressed for less
than two seconds the radio will tune in to the station
associated with that particular memory location. The
display shows the preset number and frequency of the
associated station for three seconds. The display will then
return to the previous view.
Retuning the band: When the BAND/AS button is
pressed for less than two seconds, the radio will alternate
between bands in the sequence: FM1
AM1 AM2 FM1. While changing bands from
the FM3 band to AM1, the display will show AM for
two seconds and when changing from the AM2 band to
FM1, the display will show FM for two seconds.
The display will then show the selected band and fre-
quency in the format F1 106.9 for two seconds and then
return to the previous view.
Presetting stations with a strong signal: when the
BAND/AS button is pressed for more than two seconds,
the radio will search for the 6 best stations and automati-
cally store them in the 6 memory positions of the current
band. During the search, the display will indicate FM
AST or AM AST , depending on the band selected. To
record the stations that are found, these are sorted in
ascending order of frequency and the first one is stored in
memory position 1, and so on, until positions 1-6 are all
in use. If fewer than 6 stations are found, the unused
FM2 FM3
channels will be allocated to the 107.9 MHz frequency for
FM and AM 1710 KHz for the AM band. At the end of the
search process, the radio tunes in to the first preset
position and the display will indicate the associated
preset number (1) and the station frequency for three
seconds. The display will then return to the previous
view.