Stereo Recording And Playback; Second Audio Program (Sap) - Electrohome 20ET202V User Manual

Stereo recording and playback / Second Audio Program (SAP)
NOTES:
• When playing back a tape that is not
recorded in Hi-Fi stereo mode, the
audio will automatically be monaural.
• When listening to a VHS Hi-Fi video
tape or MTS broadcast through the
VHF/UHF jack (Audio/Video cord not
connected), the sound will be
monaural.
28
5W90601A [En]27-32

Stereo recording and playback

The VHS Hi-Fi audio system permits high fidelity recording of
MTS STEREO TV broadcasts.
When an MTS STEREO broadcast is
received, the word STEREO will appear
on the screen and the program can be
viewed or recorded in stereo.
The Hi-Fi STEREO recording proce-
dure is the same as for normal record-
ings.
NOTE:
When using a Cable TV system, stereo TV programs may be
transmitted over a mono cable channel. In this case the word
"STEREO" will not appear and the sound will be in mono.
Output selection
When viewing an MTS STEREO TV program, or playing a prere-
corded VHS Hi-Fi STEREO video tape, press AUDIO SELECT to
select how the audio will be heard through the speakers. Normally
set to the Hi-Fi STEREO position, this button can be set to the
MONO position if the stereo broadcast or videotape audio is of
poor quality. The "R" and "L" positions allow the audio from the
Right or Left Hi-Fi channel to be heard over both TV speakers. This
button has no effect when viewing a MONO video tape or TV
program. Each time
when you press the
button, OUTPUT
SELECTION display
appears on the screen
for several seconds.
Refer to the chart below.

Second Audio Program (SAP)

Your unit is fitted with a SAP broadcast system which enables
you to switch to a second audio program when viewing a
selected channel.
This function applies only when the program is broadcast in
multi-languages through the SAP broadcast system.
1
Press SETUP/TV MENU in the TV/VCR mode. Then press
or to select
2
Press or
Then press to select "ON".
Then press SETUP/TV MENU
until the menu screen is cleared.
Listening to SAP
When the unit is turned on or a channel selection is made, make
certain the letters "SAP" appear on the screen. This means that the
"Second Audio Program" broadcasting is available.
STEREO SAP
28
STEREO
OUTPUT SOUND HEARD ON BOTH
SELECTION SPEAKERS
STEREO STEREO
L ch LEFT CHANNEL AUDIO
R ch RIGHT CHANNEL AUDIO
MONO MONO
option.
to select "SAP".
LANGUAGE/
IDIOMA/LANGUE
PICTURE
SAP
PICTURE PREFERENCE
/
SAP
OR
18/5/06, 2:50 PM
CH CH
ON
/ / MENU