Memorizing Channels - Electrohome 20ET202V User Manual

Memorizing channels

This unit is equipped with a channel memory feature which allows channels to skip up or down to the
next channel set into memory, skipping over unwanted channels. Before selecting channels, they must
be programmed into the unit's memory. In addition to normal VHF and UHF channels, this unit can
receive up to 113 Cable TV channels. To use this unit with an antenna, set the TV/CABLE menu option
to the TV mode. When shipped from the factory, this menu option is in the CABLE mode.
22
5W90601A [En]22-26
TV/CABLE selection
1
Press SETUP/TV MENU in the TV/VCR mode.
The TV/VCR menu screen will appear.
2
Press or
option.
3
Press or
CABLE".
4
Press or
"CABLE".
TV - VHF/UHF channels
CABLE - Cable TV channels
5
Press SETUP/TV MENU until the menu screen is cleared.
Cable TV chart
The chart below is typical of many Cable TV system channel
allocations.
22
to select
CH
TV/CABLE
AUTO CH MEMORY
ADD/ DELETE
/
to select "TV/
TV/CABLE
AUTO CH MEMORY
ADD/ DELETE
/
to select "TV" or
TV/CABLE
AUTO CH MEMORY
ADD/ DELETE
/
18/5/06, 2:50 PM
CH
CABLE
/ / / MENU
CH
CABLE
/ / / MENU
CH
TV
/ / / MENU