Picture Control Adjustment - Electrohome 20ET202V User Manual

Picture control adjustment

Picture controls are factory preset but
you can adjust them individually as
follows:
NOTES:
• The CONTRAST default setting is
set to maximum at the factory.
• The On-screen display will disap-
pear 60 seconds after finishing an
adjustment or by pressing SETUP/
TV MENU three times.
The setting can only be adjusted
when they are displayed on the TV
screen.
26
5W90601A [En]22-26
1
Press SETUP/TV MENU in the TV/VCR mode.
The TV/VCR menu screen will appear.
2
Press or
option.
3
Press or
"PICTURE", then press
4
Press or
you want to adjust. Press
to adjust the setting.
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
5
After your desired setting press SETUP/TV MENU until the
menu screen is cleared.
CANCEL
Pressing CANCEL while making picture adjustments will return all
adjustments to the factory preset levels.
26
to select
LANGUAGE/
IDIOMA/LANGUE
PICTURE
SAP
PICTURE PREFERENCE
/ /
to select
.
LANGUAGE/
IDIOMA/LANGUE
PICTURE
SAP
PICTURE PREFERENCE
/ /
to select the item
or
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
/ /
decrease brightness increase brightness
decrease contrast increase contrast
be pale color be brilliant color
be reddish color be greenish color
makes picture softer makes picture clearer
18/5/06, 2:50 PM
CH
OFF
/ / MENU
CH
OFF
/ MENU
CH
0
+32
0
0
0
/ / CANCEL / MENU