Table of Contents English 1. Before You Start 2. Install Hardware 3. Verify Installation Technical Specifications Troubleshooting Version 04.29.2011...
1. Before You Start Package Contents Ÿ TU3-H4 Ÿ Multi-Language Quick Installation Guide Ÿ USB 3.0 Type A to Type B Cable (1.8m/6ft) Ÿ Power Adapter (5V DC, 2.5A) System Requirements Ÿ USB Port: USB 3.0, 2.0 or 1.1 Ÿ USB 3.0 Cable...
1. To take advantage of SuperSpeed USB 3.0, your computer's USB port and your USB devices must support SuperSpeed USB 3.0 2. You must connect the power adapter to the TU3-H4. 1. Turn on your computer and wait until startup completes.
3. Verify Installation Windows 7/ Vista 1. Right-click Computer and click Properties. Then click Device Manager. 2. Expand “Universal Serial Bus controllers” and verify that the Generic USB Hub has been installed. Windows XP 1. Right-click My Computer and click Properties. Under the Hardware tab, click Device Manager.
Technical Specifications Hardware USB 1.1, 2.0, 3.0 Standards Input: 1 x Type-B USB Ports Output: 4 x Type-A LED Indicators USB Port 1-4 Super speed: 5Gbps (USB 3.0) High speed: 480Mbps (USB 2.0) Data Rates Full speed: 12Mbps (USB 1.1) Low speed: 1.5Mbps (USB 1.0) Power adapter 5V DC, 2.5A Power Supply...
3. Make sure that you have installed the correct driver for your external USB device in Windows. 4. After I connected my USB device to the TU3-H4 USB 3.0 Hub, I am not getting USB 3.0 speeds. What should I do? Verify that you are using a certfied USB 3.0 cable.
Page 8
TRENDnet products. Products that are sent to TRENDnet for RMA service must have the RMA number marked on the outside of return packages and sent to TRENDnet prepaid, insured and packaged appropriately for safe shipment.
Page 9
FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE OR USE OF TRENDNET'S PRODUCTS. TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT...
Need help?
Do you have a question about the TU3-H4 and is the answer not in the manual?
Questions and answers