Wireless Keypad Arming And Disarming; Wireless Keypad Arming To Stay Mode; Wireless Keypad Arming To Away Mode; Wireless Keypad Disarming - Go!Control 2GIG-CNTRL2 User Manual

Wireless Keypad Arming and Disarming

Your system may be equipped with one or more wireless keypads. Up
to four wireless keypads can be used to control the system remotely
from the main Control Panel.
Each wireless keypad has buttons for entering User Codes, STAY and
AWAY mode buttons, and FIRE and POLICE emergency buttons.
Check here if the 24-hour FIRE and POLICE emergency buttons have
been enabled by the installer:
❑ Wireless Keypad #1 emergency keys enabled
❑ Wireless Keypad #2 emergency keys enabled
❑ Wireless Keypad #3 emergency keys enabled
❑ Wireless Keypad #4 emergency keys enabled

Wireless Keypad Arming to Stay Mode

• To arm the system to Stay Mode using a wireless keypad, enter a User Code and press the
STAY button. (If Quick Arming has been allowed by the installer, just press the STAY button.)
✓ NOTE: If there are open doors or windows, the system will not allow arming to Stay Mode
with a wireless keypad. All open sensors must be bypassed at the Control Panel fi rst.

Wireless Keypad Arming to Away Mode

• To arm the system to Away Mode using a wireless keypad, enter a User Code and press the
AWAY button. (If Quick Arming has been allowed by the installer, just press the AWAY button.)
✓ NOTE: If there are open doors or windows, the system will not allow arming to Away Mode
with a wireless keypad. All open sensor-protected doors and windows must either be
closed or bypassed at the Control Panel before arming with a wireless keypad.

Wireless Keypad Disarming

• To disarm the system from Stay or Away Mode using a wireless keypad, just enter a User Code.

Wireless Keypad Fire Emergency

• To trigger a emergency fi re alarm using a wireless keypad, press the FIRE
button for two seconds. (This option must be enabled by the installer.)

Wireless Keypad Police Emergency

• To trigger a emergency police (panic) alarm using a wireless keypad, press the
POLICE button for two seconds. (This option must be enabled by the installer.)
Burglary Protection
17