C - Xmac Mini Server 2H Rackmount Installation Information - Sonnet xMac User Manual

Chapter 3 – PCIe Cards, Computer, and xMac mini Server 2H Installation Steps
B – Mac mini Installation Steps (continued)
4. Insert the top cover under the top edge of the enclosure, lower the lid,
and then secure it with the captive thumbscrews (Figure 9).
C – xMac mini Server 2H Rackmount Installation Information
You may mount xMac mini Server 2H into any standard 19-inch EIA
compliant equipment rack at least 16 inches deep. It is recommended that
you mount xMac mini Server 2H using rack slides or a rack shelf. Sonnet
offers rack slide sets for purchase separately; please visit the site at www.
sonnettech.com/product/xmacminiserver.html and click on the Accessory
tab for more information.
1. Install and secure the xMac mini in the equipment rack.
2. Connect any necessary interface cables to the back of xMac mini
Server 2H; verify the cables are plugged in securely.
3. Connect the supplied power cable between xMac mini Server 2H and
a grounded wall outlet or power strip; verify the cables are plugged
in securely.
Support Note:
If you haven't set up your Mac mini, you will need
to connect a monitor, keyboard, and mouse to complete those steps.
8
Figure 9