Denon AVR-E200 Owner's Manual page 44

Tone
Adjust the tonal quality of the sound.
1
Press TONE .
Tone
Tone Control Off
ENTER Enter
2
Use o p to select "On".
On Allow tone adjustment (bass, treble).
Off
Playback without tone adjustment.
NOTE
The tone cannot be adjusted in the DIRECT mode.
3
ui
Press to select an item to be set, and use
Bass Adjust bass.
• –6dB – +6dB (0dB)
Treble Adjust treble.
• –6dB – +6dB (0dB)
"Bass" or "Treble" can be set when the menu "Tone Control" setting is "On".
DVD
around items indicate the settings made upon purchase.
BACK Return
o p
to select a setting value.
NIGHT MODE
Optimized setting for late-night listening.
• If you do not press any button for approximately 5 seconds, the menu screen light turns off.
NIGHT
Press to select your desired mode.
ENTER
Low Set the adjusted value to "Low".
Mid Set the adjusted value to "Middle".
High Set the adjusted value to "High".
Off
Not set.
When a Dolby TrueHD signal is output, "DRC" is displayed on the TV screen.
The setting mode is also changed as shown below.
Low
Set the adjusted value to "Low".
Mid Set the adjusted value to "Middle".
High Set the adjusted value to "High".
Auto Automatic dynamic range compression on/off control according to the source.
Off
Not set.
41
Adjusting the sound field effects
around items indicate the settings made upon purchase.
D.Comp:Off