Denon AVR-E200 Owner's Manual page 15

Connecting a Blu-ray Disc player/DVD player
This section describes how to connect a Blu-ray Disc player and DVD player that does not support HDMI
connections.
For instructions on HDMI connections, see "Connecting HDMI devices" (vpage 5).
n Audio connection
The following methods are available for connecting to this unit. Use either of the methods to make
a connection.
The numbers prefixed with connectors indicate the recommendation order. The smaller the number is,
the higher playback quality is achieved.
a DIGITAL AUDIO COAXIAL connector
DIGITAL AUDIO OPTICAL connector
When a multichannel audio (digital bit stream audio) is input, this unit decodes the audio to play back
surround sound. However, digital bit stream audio signals for HD audios from Blu-ray disc players
(such as Dolby Digital Plus and DTS-HD) can not be transmitted.
When making this type of connection, you must change the settings on this unit.
(v Input connector setting )
s AUDIO IN (DVD) connector
This makes an analog audio connection. This type of connection converts digital audio to analog
audio, so the output audio may be degraded compared to connections a.
n Video connection
The following methods are available for connecting to this unit.
a VIDEO IN (DVD) connector
This makes an analog video connection.
Input connector setting
When making the following connection, you must change the input connector settings.
a DIGITAL AUDIO COAXIAL connector
Change the default "CBL/SAT" to "DVD".
DIGITAL AUDIO OPTICAL connector
Change the default "TV AUDIO" to "DVD".
For how to change, see "Input Assign" (vpage 32).
DVD
Blu-ray Disc player/DVD player
AUDIO VIDEO
AUDIO
COAXIAL OPTICAL VIDEO
OUT
OUT OUT OUT
L R
a
s a a
L R
or or
R
L
When you want to play back HD Audio (Dolby TrueHD, DTS-HD, Dolby Digital Plus, DTS Express) and
Multi-channel PCM with this unit, use an HDMI connection
12
Connecting other devices
(vpage 5 "Connecting HDMI devices").