Multi-Channel Stereo Playback; Virtual Playback; Stereo Playback; Direct Playback - Denon AVR-E200 Owner's Manual

Multi-channel stereo playback

This mode is for enjoying stereo sound from all speakers.
1
Play the selected device
(vpage 16, 17).
2
SURROUND
Press 0 or
SURROUND 1 to select "MULTI
CH STEREO".
Multi-channel stereo playback begins.
NOTE
When the input signal is Dolby TrueHD, Dolby Digital Plus, DTS-HD or
DTS Express, you cannot select multi-channel stereo mode.

Virtual playback

This mode is for enjoying surround effects using only the front
speakers or headphones.
1
Play the selected device
(vpage 16, 17).
2
Press SURROUND 0 or
SURROUND
1 to select
"VIRTUAL".
Virtual playback begins.
NOTE
When the input signal is Dolby TrueHD, Dolby Digital Plus, DTS-HD or
DTS Express, you cannot select virtual mode.
DVD

Stereo playback

This is the mode for playing in stereo. The tone can be adjusted.
• Sound is output from the front left and right speakers and subwoofer.
• If multi-channel signals are input, they are mixed down to 2-channel
audio and are played.
1
Play the selected device
(vpage 16, 17).
2
SURROUND
Press 0 or
SURROUND 1 to select
"STEREO".
Stereo playback begins.

Direct playback

Sound recorded in source is played as is.
• In this mode, the following items cannot be adjusted.
• Tone (vpage 41) • RESTORER (vpage 42)
1
Play the selected device
(vpage 16, 17).
2
SURROUND
Press 0 or
SURROUND 1 to select
"DIRECT".
Direct playback begins.
21