Emergency Light Mode - Asus S1 E-Manual

Emergency light mode

The LED projector flashes a blinking white light when you use this
feature.
Splendid/Exit
button
To use your LED projector as a flashlight:
1. Disconnect all peripherals from your LED projector then press
the power button to turn it on.
. Open the cover of your LED projector's lens.
3. Press
the NO SIGNAL display.
4. Press
white light.
IMPORTANT! Ensure that your LED projector is charged and can run
on battery mode before enabling this feature. Battery time varies
depending on usage.
NOTE: To turn off or switch between the flashlight and emergency
light feature of your LED projector, just press the Splendid/Exit
button until your preferred lighting feature is disabled or enabled.
LED projector E-Manual
on the control panel of your LED projector to launch
repeatedly until the LED projector flashes a blinking
13