Table Movement
Table height can be adjusted manually or with the
digital key pad and motor (see Figure 15).
Manual Table Movement: Turn the handwheel
located under the front of the infeed table for
manual table positioning.
Motorized Table
Movement:
Press the TABLE
UP or TABLE DOWN key once for motorized
table positioning in 0.005" (0.1mm) increments.
Numerical Key
Pad:
Push the keys to enter the
sanding depth needed.
Metric or Standard
Key:
Press and hold the
SET button for 3 seconds to calibrate display at
the current board thickness; or press and hold
key for 10 seconds to toggle the display between
metric and standard measurement.
Table Start
Key:
Push to move table to a preset
sanding depth.
Table Stop
Key:
Push to stop the table move-
ment immediately.
Digital
Display:
Shows final table sanding
depth.
-22-
G0445/G0582/G9962Z/9962ZX Wide Belt Sander