Sustain Footswitch
This jack accepts an on/off type footswitch to sustain held keys.
Either a normally-open or normally-closed momentary footswitch can be
used, as the polarity is automatically sensed on power-up.
Control Footpedal
This jack accepts a continuously variable footpedal to control the output
volume. Most types of variable footpedals with a stereo plug can be used.
(Please refer to the wiring diagram shown below.) You can also use a variable pedal
that outputs 0-5 Volts DC at the tip of a mono phone plug.
Pedal Wiring Diagram
10K - 250K
10K - 250K
Kensington
®
You can secure your keyboard with a Kensington security cable to prevent it
from being stolen.
24
Ring
Tip
Sleeve
5V
Tip
Sleeve
Security Slot
or
LONGboard
Sleeve
Tip
Ring
Sleeve
Tip
SHORTboard
61
49