E-Mu LONGboard 61 User Manual page 23

Hide thumbs Also See for LONGboard 61:
Table of Contents

Advertisement

System Menu
MIDI CC - Allows you to assign MIDI Continuous Controller numbers
to the data slider so it can be used as a performance control. After selecting
a CC channel, the slider will send data to the internal synthesizer as well as
sending MIDI CC data messages to an external MIDI synth or computer
application.
You can control these internal synthesizer parameters using the data slider.
Parameter
Pan
Release (only)
Decay (only)
Global Aftertouch On/Off
Local Control On/Off
To Control Pan using the Data Slider:
1.
Press the
Select button until CC Assign is selected.
2.
Use the
Data Slider to select the MIDI controller number: 10 (Pan).
3.
Press the
Select button repeatedly until none of the select LEDs are lit.
4.
Move the
MIDI Chn
Allows you to set the MIDI channel for the keyboard. Keyboard and
controller data will be transmitted on this channel.
If Split Mode is selected, the MIDI channel will be set for the currently
selected section (upper or lower). The upper and lower sections can each
transmit on a different MIDI channel. (In either Split or Layer mode.)
To Select a MIDI Channel:
1.
Press the
Select button repeatedly until the MIDI Chn LED is lit.
2.
Select the desired MIDI Channel
3.
Press
Select to exit the menu.
User's Guide
Data Slider to adjust the Pan position.
MIDI Controller No.
10
72
75
85
122
using the data slider.
21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Shortboard 49

Table of Contents