3.02
INVERTER MIG Series Control Methods
Weld Control
2T Mode
4T Mode
Spot mode
Table 6 Inverter Mig series selection of weld technology in different weld methods
3.03
Weld parameter description
Figure 4 Inverter Mig series front panel with parameter description
Parameter
Welding Current
This parameter sets the welding current.
MIG only. Burnback time is the difference between the wire feed motor stopping and
Burnback Time
switching off of the welding current. The Burnback time allows the electrode wire to
burn out of the molten metal weld pool, to separate the electrode wire from work piece.
BOSS Inverter Mig 165¡¢ 200 Operating Manual
Table 7 Weld parameter description for Inverter Mig series
MIG/MAG
Yes
Yes
No
Description
- 13 -
Description
2T mode MIG
4T mode MIG
Spot mode MIG