Specifications; Duty Cycle - Boss MIG 165 Operating Manual

2.03

Specifications

MODEL
Input voltage and frequency and phases
KVA @ max output
Max current
Output current range
Open circuit voltage
Duty cycle at 40¡æ
Weight
Dimensions
2.04

Duty Cycle

The duty cycle of a welding power source is the percentage of a ten (10) minute period that it can be
operated at a given output without causing overheating and damage to the unit. If the welding amperes
decrease, the duty cycle increases. If the welding amperes are increased beyond the rated output, the duty
cycle will decrease.
WARNING: Exceeding the duty cycle ratings will cause the thermal overload
protection circuit to become energized and shut down the output until has
cooled to normal operating temperature
NOTICE£º
Due to variations that can occur in manufacture products, claimed performance, voltages, ratings, all
capacities, measurements, dimensions and weights quoted are approximate only. Achievable capacities and
ratings in use and operation will depend upon correct installation, use, applications, maintenance and service.
BOSS Inverter Mig 165¡¢ 200 Operating Manual
Continually exceeding the duty cycle ratings
can cause damage to the welding power source.
Inverter Mig 165
220/240V 1ph
5.8KVA
160A
30~160A
62/68V
60%
30Kg
450 210 470
Table 4
- 10 -
Inverter Mig 200
220/240V 1ph
8.1KVA
200A
30~200A
62/68V
60%
31Kg
450 210 470