Samsung SCO-2370 User Manual page 12

setup
HLC : Enable the user to change the level,
mask tone area.
M 
For effective viewing of license plates, there is a minimum required illumination and the shutter
speed needs to be faster than 1/200sec.

Because there can be a difference in the effectiveness of HLC according to the amount of light
area in the screen, optimize the installation angle for the best HLC performance.

When dark, the HLC is only activated when a bright light exceeding a specifi c size. (In NIGHT
ONLY mode.)

The HLC is not activated in day light or when bright light is not present at night. (In NIGHT ONLY mode.)

The HLC is not activated when the D-ZOOM mode is 'ON' or DIS mode is 'ON'.
22_ setup
HLC SETUP
LEVEL MIDDLE
MASK TONE 7
IIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIII
RETURN
MOTION DETECTION
This product has a feature that will detect movements of objects in 8 different areas on
the screen. The camera detects an object's movement by sensing disparity of outline,
brightness levels and color. The camera sends a detection signal out via the MD output
terminal and will zoom into a pre-determined point.
1. When the SETUP menu screen is displayed,
select 'MOTION DETECTION' by using the
Function Setup switch so that the arrow
indicates 'MOTION DETECTION'.
OFF : MOTION DETECTION mode is cancelled.
ON : Any motion in the selected areas is observed.
- AREA SEL : You can select the area
you wish to observe from
the 8 area.
- AREA MODE : Determines whether
to use the MD area
selected in SENSITIVITY
- SENSITIVITY : You can select low
or high level. When
SENSITIVITY is high,
motion detection
sensitivity is increased to recognize even small movement
- SMART ZOOM : Smart zoom is operated in connection with MOTION
DETECTION. When the SMART ZOOM function is 'ON' while
the MOTION DETECTION mode is 'ON', the zoom goes to
the TARGET ZOOM position once motion is detected. Once
the zoom action is fi nished and 'DWELL TIME' has passed,
the zoom returns to the 'SMART ZOOM' position.
MAIN SETUP
SSDR ON
WHITE BAL ATW
BACKLIGHT OFF
MOTION DET
OFF
FOCUS
EXPOSURE
SPECIAL
RESET
EXIT
MD SETUP
AREA SEL AREA 1
AREA MODE ON
SENSITIVITY LOW
SMART ZOOM OFF
RETURN
English_23