Scooter Care And Storage; Matte Color Caution; Care - Yamaha Zuma YW125Y Owner's Manual

Table of Contents

Advertisement

Care<IXE>

SCOOTER CARE AND STORAGE

SCOOTER CARE AND STORAGE

Matte color caution

NOTICE
1
Some models are equipped with
matte colored finished parts. Be sure
2
to consult a Yamaha dealer for ad-
vice on what products to use before
3
cleaning the vehicle.
Using a brush, harsh chemical prod-
ucts or cleaning compounds when
4
cleaning these parts will scratch or
damage their surface. Wax also
5
should not be applied to any matte
colored finished parts.
6
7
8
9
EAU37833

Care

ECA15192
While the open design of a scooter re-
veals the attractiveness of the technol-
ogy, it also makes it more vulnerable.
Rust and corrosion can develop even if
high-quality components are used. A
rusty exhaust pipe may go unnoticed
on a car, however, it detracts from the
overall appearance of a scooter. Fre-
quent and proper care does not only
comply with the terms of the warranty,
but it will also keep your scooter look-
ing good, extend its life and optimize its
performance.
Before cleaning
1. Cover the muffler outlet with a plas-
tic bag after the engine has cooled
down.
2. Make sure that all caps and cov-
ers as well as all electrical couplers
and connectors, including the
spark plug cap, are tightly installed.
3. Remove extremely stubborn dirt,
like oil burnt onto the crankcase,
with a degreasing agent and a
brush, but never apply such prod-
EAU26092
Cleaning
NOTICE
7-68
7-1
ucts onto seals, gaskets and wheel
axles. Always rinse the dirt and
degreaser off with water.
● ● ● ● ●
Avoid using strong acidic wheel
cleaners, especially on spoked
wheels. If such products are
used on hard-to-remove dirt, do
not leave the cleaner on the af-
fected area any longer than in-
structed. Also, thoroughly rinse
the area off with water, immedi-
ately dry it, and then apply a cor-
rosion protection spray.
● ● ● ● ●
Improper cleaning can damage
plastic parts such as cowlings,
panels, windshields, headlight
lenses, meter lenses, etc. Use
only a soft, clean cloth or sponge
with mild detergent and water to
clean plastic.
● ● ● ● ●
Do not use any harsh chemical
products on plastic parts. Be
sure to avoid using cloths or
EAU25991
EAU25991
ECA10781

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents