Table of Contents
Advertisement
GSM Intercom Door / Gate Entry System
1. Take the wall mount bracket from the package and screw it on proper place. (As shown in Step 1 &
2 below)
2. Open the bottom cover of door unit and pass the wires through wire-hole. Then, refer to the
"Wiring Diagram and Wiring Instruction" to connect wires and insert the SIM card to SIM card
slot. (As shown in Step 3)
3. Put the bottom cover back. (As shown in Step 4)
4. Place door unit on the fixed wall mount bracket. (As shown in Step 6 & 7)
5. Put the acrylic cover on the door unit when door unit has been screwed. (As shown in Step 8 & 9)
6. Plug the AC adapter into the AC outlet; the door unit will go into standby condition.
WARNING: Only use the original power adapter supplied. Using any other adapter might damage the
door unit and cause a risk of electric shock.
INSTALLATION
6
Advertisement
Table of Contents
